Pump Chamber This 1500*3500 bare pump chamber was delivered to our workshop today ready to be built for our client, a store of a large supermarket chain. Pump stations are used to move wastewater to higher elevations and are required when a gravity feed is unavailable. Once built the packaged pump station will be installed…
Details
Blocked Outside Drain At Alton Pumps we often get calls for an blocked outside drain. But it’s not often from a livery yard. The stable owners rang us with blocked drain issues which resulted in the drains backing up into the yard causing standing water. On investigation we found that horse waste and straw had…
Details
UPVC Plastic Pipework At a recent site inspection our engineers identified that the pipework in a pump chamber had corroded beyond repair – this included the gate valve which had snapped due to severe corrosion. The gate valve (or sluice valve), is the valve that controls flow and is commonly found in water treatment systems. We advised the client…
Details
We were called out last week by a new client who was in need of a drainage company. The locally based customer rang at 10am and we had arrived onsite, unblocked and cleaned the drain by 12pm. During heavy rainfall if you have even a small amount of debris in your drains they can become…
Details
High Level Pump Alarm Last week a customer called in reporting their high level pump alarm was activated and the tank was quickly filling up. A high level pump alarm is often used in packaged pump stations, sewage treatment plants and septic tanks. The alarm is triggered by the float switch and signals that fluid levels are…
Details
Pump Tripping Call Out After a late callout on a Friday we went to a vets practice to inspect a pump that kept tripping. As a result of our investigation our engineer found that the pump was blocked. Massively rammed with debris which was causing the issue rather than an electrical fault. Our engineer…
Details
Alton Pump Services HQ have moved to a new premises at the start of 2021. We are now based at: Unit 4A Blacknest Industrial Estate, Blacknest, Alton, Hampshire, GU34 4PX If you require assistance with your pump, tank or water supply please call our expert team of pump engineers 01420 561661.
Details
Water Well Pump Installation Alton Pump Services were recently asked to install a new water well for a client who were having problems with leaks from their old 18th century well. As their only fresh water source, it was vital that the well function correctly and safely. The clients instructed Alton Pump Services to complete…
Details
Soakaway Installation in Hampshire On a pre-planned service to a clients treatment plant in Hampshire which discharges to a soakaway our engineers discovered that the installation had failed and the outlet was full. Why do Soakaways fail? The purpose of a soakaway is to drain excess water caused by heavy rain if the drainage system or septic…
Details
Manhole Chamber Rebuild The team were called to unblock a drain for a local council. On inspection they found that one of the manhole chambers was unstable and required a full rebuild. Manhole chambers – also known as inspection chambers, are an integral part of a drainage system allowing access for drains to be cleared, carry out essential repairs,…
Details
Hampshire Office:
Unit 5B, Passfield Mill Bus Park,
Mill Lane, Passfield,
GU30 7RR
Tel: 01420 561661
Email: sales@altonpumps.com
