The challenge
A pump station in Hampshire required a refurbishment after the existing pumps reached the end of their service life. The customer needed reliable pumping to prevent surface water or foul water from backing up into the property.
What we found
The inspection showed that the existing pumps were worn and no longer suitable for continued use. The guide rails and top brackets also needed replacement to ensure the new pumps could be installed correctly and maintained safely.
What we did
We supplied and installed two new submersible pumps in the station. We also fitted new top brackets and guide rails to secure the pumps properly.
- Supplied two new submersible pumps.
- Installed new top brackets.
- Fitted new guide rails.
- Replaced the float switches.
The result
The pump station was restored to full working order with the new equipment. The customer now has a reliable system for moving wastewater or surface water away from the site.
Why it matters
Pump stations are critical infrastructure that move wastewater or surface water from a property to the mains sewer or drainage system. Submersible pumps operate in wet conditions and are subject to wear, corrosion and blockages over time. When pumps fail, there is a risk of flooding or sewage backup into the building.
Servicing and maintenance
Regular servicing helps extend the life of pump station equipment. A service includes checking the pumps, floats, control panel and alarms to identify wear before it causes a failure. Alton Pumps provides routine maintenance for package pump stations across the South East.
Pump station repair. Twin pump station refit near Southampton.
This case study is written from the completed job record. Photographs are from the job. Customer names and addresses are not published.